(Shiinaha)YY-4065C Pendulus Qalabka Soo Celinta
Sharaxaad Gaaban:
Ihorudhacs:
Mashiinka tijaabinta balaastikada saamaynta caagga ah ee tamarta 0.5J pendulum nooca saamaynta mashiinka tijaabinta balaastikada, ku habboon go'aaminta adkaanta inta u dhaxaysa 30IRHD ~ 85IRHD caag vulcanized ah
Qiimaha soo noqnoqda ee xabagta.
Iyada oo la raacayo GB/T1681 "go'aaminta adkeysiga caagga vulcanized" iyo ISO 4662 iyo heerarka kale.
Mashiinku wuxuu qaataa xakamaynta shaashadda taabashada, xakamaynta sare ee saxda ah, xogta la cabbiray waxaa lagu daabici karaa daabacaadda micro.
Qiyaasta Farsamada:
| Shayga | Codsiga Farsamada |
| Dhexroorka feerka | φ12.45~φ15mm |
| Tijaabi dhumucda qaybta | 12.5 ± 0.5mm |
| Cabbirka Tusaalaha | φ29mm×12.5mm |
| baaxadda saamaynta | 0.34 ~ 0.35 kg |
| Xawaaraha saamaynta | 1.4 ~ 2.0 m/s |
| Xagasha Saamaynta | 90° |
| Cabirka | 550mm×180mmx 470mm |
| Awood | AC220V 60Hz 50W
|
YY-4065C Pendulus Qalabka Soo CelintaMuuqaalka Hawlgalka
开始试验--Ku xidh qalabka korontada oo shid dareemaha dambe ee mishiinka
先调节水平--Marka hore hagaaji heerka mashiinka
将水平泡调节到中间范围--Ku hagaaji xumbo toosan oo u dhig xadka dhexe
摆动冲击杆--Usha saamaynta lulidda
使他呈现自由垂直状态--Ka samee usha saamaynta mid taagan oo xor ah
按Dib u dajin键--riix”Dib u dajin”
先把夹具松开---Dabci kulanka marka hore
放入试样---Samballada ku rid qalabka
夹具夹紧--- Samee xajinta xajinta
这个可以旋转，用于微调夹具松紧程度--- Tan waxa loo rogi karaa si loo hagaajiyo cidhiidhiga qalabka
这个可以把夹具夹紧--Tani waxay isku hayn doontaa jigjiga
按Dib u dajin键--riix"Dib u dajin”
将冲击杆挂起---Dal usha saamaynta
这两个指示灯都是绿色时---Marka labada nalba cagaar yihiin
按SAAMAYN键，释放冲击杆---riix”SAAMAYN”, Usha sii daaya, dhammayso tijaabada hal mar.
